New Delivery for PVC Resin For Medical Devices - Polyvinyl chloride resin QS-800F – Junhai
New Delivery for PVC Resin For Medical Devices - Polyvinyl chloride resin QS-800F – Junhai Detail:
PVC QS-800F is produced by 370,000 tons/year PVC plant invested 840 million yuan by Qilu Petrochemical. The device introduces advanced suspension production technology from Western Chemical Company in the United States, with obvious quality and environmental characteristics: the whole production is closed, no impurities into, can effectively ensure product quality; Polymerization system using water-soluble non-toxic initiator, product health; Using advanced stripping and drying technology, the residue of ethylene chloride in the product is less than 1ppm, without nitrile group and toluene; Using 135 cubic meter polymerization kettle, single line annual production capacity of 200,000 tons, product batch stability is high. After industrial processing test, Qilu petrochemical QS series of products average polymerization degree, plasticizer absorption, impurities content and other technical indicators are very excellent.
Grade QS-800F is used for extrusion section, wire and cable material, flexible and rigid material, rigid or semi-rigid pressed material, and flexible film and sheet.
Parameters
| Grade | PVC QS-800F | Remarks | ||
| Item | Guarantee value | Test method | ||
| Average polymerization degree | 750-850 | GB/T 5761,Appendix A | K value 60-62 | |
| Apparent density, g/ml | 0.51-0.61 | Q/SH3055.77-2006, Appendix B | ||
| Volatiles content (water included), %, ≤ | 0.30 | Q/SH3055.77-2006, Appendix C | ||
| Plasticiser absorption of 100g resin, g, ≥ | 17 | Q/SH3055.77-2006, Appendix D | ||
| VCM residue, mg/kg ≤ | 5 | GB/T 4615-1987 | ||
| Screenings % | 2.0 | 2.0 | Method 1: GB/T 5761, Appendix B Method2:Q/SH3055.77-2006, Appendix A |
|
| 95 | 95 | |||
| Fisheye number, No./400cm2, ≤ | 30 | Q/SH3055.77-2006, Appendix E | ||
| Number of impurity particles, No., ≤ | 20 | GB/T 9348-1988 | ||
| Whiteness (160ºC, 10 minutes later), %, ≥ | 78 | GB/T 15595-95 | ||
Product detail pictures:
Related Product Guide:
Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for New Delivery for PVC Resin For Medical Devices - Polyvinyl chloride resin QS-800F – Junhai , The product will supply to all over the world, such as: Bolivia, Ecuador, Czech Republic, In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
By Liz from Amman - 2017.08.16 13:39
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Adelaide from Buenos Aires - 2017.02.18 15:54
